Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWhy Johns Creek Homeowners Choose Ghost Controls Gate Repair
We provide independent Ghost Controls Gate Repair in Johns Creek, GA, with same-day diagnosis for most swing-gate operators and written pricing before any work begins. Our technicians carry Ghost Controls-compatible control boards, batteries, and arm hardware on every truck, and we document every adjustment with photos under our Haven Standard. Call (678) 394-1765 to schedule.
Ghost Controls operators are popular in Johns Creek for good reason. The solar-compatible TSS1 and dual-swing TDS2 series fit the estate-style properties common in communities like Country Club of the South and St. Ives, where homeowners want automation without trenching AC power across manicured lawns. But Georgia humidity, red clay soil shifts, and the occasional ice storm create failure patterns that generic gate companies miss because they don’t know the brand’s control boards from its remote receivers. We’ve been working on Ghost Controls units in Johns Creek long enough to know that a gate stopping mid-cycle is usually a battery or solar charging issue, not a motor failure, and we won’t sell you a motor you don’t need. We also offer Ghost Controls service in Alpharetta for homeowners in neighboring communities.
We’re an independent shop, not affiliated with or authorized by Ghost Controls. That means we diagnose what is actually wrong, use OEM-compatible or quality aftermarket parts that match the operator’s specifications, and tell you when a repair is the wrong long-term call.
Why Trust Vance Gate Repair Johns Creek for Your Ghost Controls Gate Repair?
Adrian Vance started this company in 2014 after years of commercial access-control work in Queens, NY, where he learned to document every wire termination and limit-switch setting before leaving a job site. That habit, picked up at Queensborough Community College and refined on metro-area commercial entry systems, is now The Haven Standard: written price before work starts, photographed evidence of what was found and what was adjusted, and a 365-Day Done Right Promise with no expiration within that window.
Our Ghost Controls expertise runs deep because we’ve worked on these specific operators across Johns Creek’s HOA communities and private estates. We know the TSS1XP’s control board layout, the TDS2’s dual-arm synchronization procedure, and how the SPK-10 solar panel performs when a homeowner’s landscaping matures faster than expected. We stock replacement SLA batteries, remote receivers, and arm hardware that match Ghost Controls’ voltage and amp-draw requirements, and we understand the warranty implications of every part choice.
Every technician we send is background-checked, uniformed, and named with a photo before arrival. You’ll never get a voicemail loop when you call (678) 394-1765 - a live person answers 24 hours a day. And under Haven Standard Clause 1, the flat, itemized price is written and handed to you before anyone picks up a tool.
Common Ghost Controls Gate Repair Problems We Fix in Johns Creek
- Solar charge controller or battery degradation from Georgia heat and humidity. The TSS1 and TSS1XP with solar kits are common in Johns Creek, but our summers cook SLA batteries in enclosed housings and our humidity corrodes charge-controller terminals. A battery holding less than 10.5 volts under load will open the gate fine on the first cycle, then fail on the second when the solar panel can’t keep up. We test actual voltage under load, not just static charge, and we relocate panels when new plantings shade them.
- Arm bracket fatigue and shear pin failure on single-swing operators. Heavy decorative iron gates in communities like Shakerag and Medlock Bridge often exceed the TSS1’s rated capacity. The arm bracket takes the stress, the shear pin fails as designed, and the gate drifts open or won’t latch. We inspect the bracket for hairline cracks, check gate balance and post plumb, and won’t just replace the pin if the root cause is an overloaded operator.
- Control board water intrusion and corrosion at limit switch terminals. Ghost Controls boards sit low in the operator housing, and Johns Creek’s driving rains find every gasket gap. Corroded limit switch terminals cause erratic reversing - the gate thinks it has hit an obstacle - or failure to close fully. We clean the terminals, seal the housing with proper gasketing, and photograph the board condition before and after.
- Misaligned actuator arm and gate post causing binding and overload trips. North Fulton County’s expansive red clay heaves seasonally, shifting gate posts out of plumb over years. The actuator arm binds, the motor draws excessive amps, and the operator’s thermal overload shuts it down. We check post plumb with a level, measure arm angle, and reset the mounting geometry rather than just resetting the overload and walking away.
- Remote receiver and keypad sync failures after power events or battery swaps. After a battery replacement or hard reset, Ghost Controls remotes and keypads sometimes lose pairing. We re-sync all accessories, test range from the street, and set auto-close timers to account for driveway slope - a detail missed by technicians who don’t know the programming sequence.
BeforeAfterGhost Controls Parts & Our Repair-vs-Replace Approach
We keep common Ghost Controls OEM-compatible parts on our Johns Creek trucks: 12V SLA batteries sized for the TSS1/TDS2 series, control boards for the XP variants, remote receivers, and arm hardware including shear pins and bracket kits. When a board is available from Ghost Controls directly, we use it. When lead times stretch or the part is discontinued, we source quality aftermarket replacements that match the operator’s 12V DC system and duty cycle.
Our repair-vs-replace decision is straightforward. If the operator housing is cracked and letting water in, if the board has failed twice in eighteen months, or if the gate weight exceeds the operator’s rating by a margin that will keep breaking shear pins, we’ll tell you. No point in a third board replacement when a properly specced operator - Ghost Controls or another brand we service - is the cheaper five-year answer. If you’re outside Johns Creek, we also provide Ghost Controls service in Duluth. Under Haven Standard Clause 1, that conversation happens before any work starts, with a written price for each option. Call (678) 394-1765 and we’ll walk through it.
Our Ghost Controls Service Process - Step by Step
- 1
Diagnosis with documentation. We test battery voltage under load, inspect the control board for corrosion, check arm alignment and gate balance, and photograph everything - the board’s terminal condition, the arm angle, the post plumb reading. You get a copy; we file the rest.
- 2
Written scope and price. Before any repair, we hand you a flat, itemized price covering parts and labor. No open-ended hourly rates. This is Haven Standard Clause 1, non-negotiable.
- 3
Repair or installation with OEM-compatible parts. We replace batteries with properly specced SLAs, install boards that match voltage and amp draw, and torque arm hardware to Ghost Controls’ specification. If we relocate a solar panel, we document the new angle and shade exposure.
- 4
Testing across all access methods. We cycle the gate via remote, keypad, and vehicle exit wand if installed. We test auto-close timing on battery power alone, simulating evening conditions when the solar panel is dark.
- 5
Warranty and record delivery. Every repair is covered by our 365-Day Done Right Promise. You leave with a photo log, a written condition note, and our direct number. If anything drifts out of spec within that year, we make it right at no charge.
Ghost Controls Products We Service & Install in Johns Creek
We work on the full Ghost Controls residential line: the Heavy-Duty Single Swing TSS1 and TSS1XP (AC or solar), the Dual Swing TDS2 and TDS2XP, and solar configurations using the SPK-10 panel kit. We service and program Ghost Controls wireless keypads, remote transmitters, and Vehicle Exit Wands. For tube gates and lighter residential applications, we also see the earlier Ghost Controls single-swing units still running in Johns Creek’s 1990s-built subdivisions.
We stock TSS1/TDS2 batteries, control boards, and arm hardware locally for fast turnaround on most repairs.
We Also Service These Brands
We’re not a single-brand shop. Our technicians are trained on nine major automation lines: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We also provide general Gate Repair across all brands we service. If your property has a mixed fleet - say, a LiftMaster on the main drive and a Ghost Controls on a secondary entrance - one company handles both. We don’t steer customers toward replacement with our preferred brand; we repair what is there, and we document what we found.
FAQs - Ghost Controls Gate Repair Service in Johns Creek
No. We are an independent Ghost Controls service provider, not affiliated with or authorized by the manufacturer. We use OEM-compatible and quality aftermarket parts that meet the operator’s specifications, and we diagnose failures based on hands-on experience with the brand’s control boards, batteries, and arm systems.
We use OEM parts when available and practical, and quality aftermarket replacements when lead times or availability require it. Every part we install matches the operator’s voltage, amp draw, and duty cycle requirements. We document part numbers on every job under Haven Standard Clause 4.
Most residential Ghost Controls repairs in Johns Creek are completed in two to four hours, including diagnosis, repair, and testing. Solar-related issues sometimes require a return visit to verify battery performance through a full charge cycle. We schedule follow-ups at no additional charge if needed within the 365-Day Done Right Promise window.
We service the TSS1, TSS1XP, TDS2, and TDS2XP operator series, plus solar configurations using SPK-10 panels and all associated keypads, remotes, and exit wands. We also support earlier Ghost Controls single-swing units still in service across Johns Creek’s older subdivisions.
Manufacturer warranties typically require authorized service for full coverage. As an independent provider, our repairs may not preserve factory warranty terms. We explain this before any work begins, and we keep records of every part installed so you have documentation if warranty questions arise later.
Most Ghost Controls repairs in Johns Creek fall between $180 and $450, depending on whether the issue is a battery replacement, control board swap, or arm hardware rebuild. A full operator replacement, when needed, typically runs $1,200 to $2,400 installed, varying with gate weight, solar configuration, and access control accessories. We deliver a flat, written price before any work starts - no estimate ranges that balloon on the invoice. Call (678) 394-1765 for an exact quote; estimates are free.
The battery is either dead, undersized, or not charging properly. Ghost Controls solar and AC units rely on a 12V SLA battery for backup power; if it won’t hold at least 10.5 volts under load, the gate dies when AC drops or when solar charging can’t keep up. We test actual voltage under load, replace failing batteries with properly specced units, and verify the solar panel or AC transformer is delivering correct charge voltage. Call (678) 394-1765 if your gate won’t run on battery alone.
Yes. Ghost Controls systems accept the manufacturer’s wireless keypad and Vehicle Exit Wand, and we can integrate third-party phone-entry or intercom systems that trigger the operator’s relay input. We program all accessories, test range from the street, and set auto-close timing to match your driveway slope and local HOA requirements if applicable. Call (678) 394-1765 to discuss your access control setup.
Weak remote range usually means a failing remote battery, a degraded remote receiver antenna, or interference from new electronics in the home or vehicle. We test signal strength at multiple distances, replace the receiver if its range has degraded, and re-sync all remotes to rule out pairing drift. Sometimes the fix is a fresh 12V battery in the remote; sometimes it’s a receiver board showing corrosion at the antenna terminal. Call (678) 394-1765 and we’ll diagnose it on-site.
Inspect the arm bracket for cracks, check whether the shear pin has failed repeatedly, and note if the gate has become harder to push by hand. A single shear pin failure with an otherwise straight bracket is a repair. Repeated pin failures, a bent or cracked bracket, or an operator paired with a gate beyond its weight rating means replacement is the honest call. We measure gate weight and post plumb, then give you a written price for both options before any work starts.
Not special, but properly specced for heat and humidity. We use sealed lead-acid batteries rated for high-temperature operation, and we position solar panels to avoid shading from Johns Creek’s fast-maturing landscaping. The SPK-10 panel that ships with many kits is adequate for most installations, but panel angle and shade exposure matter more than panel size. We document both on every solar job and adjust if trees or new plantings change the light pattern.
Book Your Ghost Controls Service in Johns Creek, GA
Call (678) 394-1765 to speak with a live person - any hour, any day. We’ll schedule a free estimate, deliver a written price before any work begins, and leave you with a documented photo record of everything we found and fixed. That’s The Haven Standard. Name what you found. Name what it costs. Name what you left behind.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Johns Creek since 2014.